ESoCoP - European Society for Computer Preservation - text version for old browsers
[ Home | Preserved models | Documentation | News | Events | About us | Membership | Support us | AStISI | CTRL+Cinema | Contact ] - Full site

Preserved models > Amiga

Nexus SAM 440 PPC Amiga OS 4.1

Producer: Amiga - Category: Personal Computer

Photos: Photo 1 (small)

Photo 1: blakespot (Blake Patterson), CC BY 2.0, via Wikimedia Commons (Sam440ep Flex.jpg)

Motherboard, 2007, ACube Systems. The Sam440ep ("Samantha") is a modular PowerPC motherboard made by the Italian company ACube Systems around the AMCC 440EP system on a chip, one of the few new hardware platforms licensed to run AmigaOS 4; the Esocop specimen runs AmigaOS 4.1.

Years2007 to about 2012
ManufacturerACube Systems Srl (Italy)
ProcessorAMCC PowerPC 440EP system on a chip at 533, 667 or 800 MHz, with double precision FPU
RAM512 MB or 1 GB DDR SDRAM soldered on board
GraphicsATI Radeon Mobility M9 with 64 MB, DVI-I output
Storage2 x Serial ATA, Compact Flash slot, USB
InterfacesEthernet 10/100, 4 x USB 2.0, serial, audio (AC97), PCI slot, mini PCI slot
Form factorMini ITX (Sam440ep) or Flex ATX (Sam440ep-flex)
Operating systemsAmigaOS 4.0 and 4.1, Linux

Documentation

No documents available yet for this model. See the documentation section.

Other models by Amiga


© Esocop 2017-2026. European Society for Computer Preservation, non-profit association, Chiasso, Switzerland. Home | Full site | Contact